Hobs in HSS-E, PM or Carbide. Available as shell or shank type as well as Pre-cutting and Finishing hobs. Hobs are available with standard tooth profiles or with special optimised tooth forms taking into account the requested operating parameters, the process parameters or the cutting parameters.
W-EV
Hobs for involute gears
Hobs in HSS-E, PM or Carbide for involute gears. Quality A, AA (Upon request AAA with certificate), topping or non topping. Modul range M0.15 - 2.5. Bore type hobs are usually available from stock.
W-SG
Hobs for multiple-worm / threads
Hobs in PM or Carbide to cut multiple start worms and threads. Quality AA, topping. Modul range 0.15 - 2.5. For standards see W-EV or Special profiles section. Usually Hob OD > 50 with bore and number of flutes > 15.
W-SR
Hobs for enveloping wormwheel
Hobs for wormwheels in PM or Carbide. Available as bore or shank type hob. Single or multiple start hobs for radial or tangential hobbing. Class A or AA, topping. Modul range from 0.2 - 3.0 The form and dimensions of wormwheel hobs are based upon the form and dimensions of the worm. These hobs can be designed with various corrections to influence the resulting mesh between worm and mating wormwheel. The OD of a new wormwheel hob is the same as worm OD plus an allowance for backlash and an allowance for resharpening. The final dimensions of a wormwheel hob depend on the hobbing machine they will be used on and the hobbing method to be used.
W-ZW
Hobs for involute splines
Hobs available in PM or Carbide for splines. Quality AA, non topping, with or without tip champfer. Modul range 0.3 - 4.0 Per DIN 5480, DIN 5482, ANSI B92.1, NF E22-141, NF E22-144, BS 3550. Bore type hobs are often available from stock.
W-KBW
Hobs for straight-sided serrations
Hobs for straight-sided serrations in HSS, PM or carbide.
Quality A, AA, non topping.
Modul range 0.1 - 3.5
Per DIN 5481A, SAE, BS 2059, NF E22-151. A different hob is required for each number of teeth. Bore type hobs are usually avaible from stock.
W-KW
Hobs for parallel side splines
Hobs in PM or carbide for parallel side splines.Quality class A, AA, topping or non topping, tip champfer available.
Max. pitch 20mm.
With or without lugs (undercut). As pre-cutting or finishing hob.
W-ZR
Hobs for timing belt pulleys
Hobs in PM or carbide for timing belt pulleys or synchronization pulleys.
Quality class A, AA, topping, for pitchs 1 -20 mm.
Per DIN 7721, ISO 5294, PowerGrip HTD, GT and GT2, AT, Isoran RPP, BANDO.
Bore type hobs are often available from stock.
W-KR
Hobs for sprockets
Hobs in PM or Carbide for Sprockets.Quality class A, Topping, Pitches 3 - 19.05mm
per DIN 8197, ASA B29.
W-RR
Hobs for knurrls
Hobs in Carbide for Knurrls.Quality class A
Per DIN 82
Available Single start for workpiece tip radius up to 0.04mm.
Available as 2 start alternative type for pointed workpiece tip.
W-ZY
Hobs for cycloidal gears
Hobs for cycloidal gears only in carbide and as bore type hob.Quality class A, topping.
Modul range 0.15 - 1.25
per DIN 58425, NHS 56702-56703 a-b-c, NIHS 20-25 (=NHS 56704; =BS 978 Part2), NIHS 20-02, EVJ.
Theoretically a distinct hob is required for each number of teeth. However, in reality the following tooth range hobs are available:
7 / 8 / 9 / 10-11 / 12-13 / 14-15 / 16-17 / 18-19 / 20-21 / 22-23 / 24-25 / 26-28 / 29-31 / 32-34 / 35-38 / 39-42 / 43-46 / 47-50 / 51-55 / 56-60 / 61-65 / 66-72 / 73-80 / 81-90 / 91-100 / 101-110 / 111-120 / 121+
W-SE
Single-position hobs
Single-position hobs in PM or Carbide for ratchets.Quality class A, Topping or Non topping.
Modul range 0.2 - 2.
Per customer specific ratchet drawing with the rotation direction clearly marked. The hob is always a special with specific positioning data.
W-KRV
Conikron cutters for bevel gears
Available in CPM Rex 76 or Carbide.Quality class A, Non topping, 1 or 2 start.
Per DIN 867, AGMA or for special profiles.
Some bore type available from stock.
W-SP
Hobs for special tooth forms
Hobs in PM or Carbide for special tooth forms.Quality Class A or AA, Topping or Non topping.
Modul range 0.2 - 3.
Per customer specific workpiece drawings.
Cutters in HSS-E, PM or Carbide. Available as bore type or shank type either as Pre-cutting or finishing. Cutters are available with standard profiles or also with optimized profiles based upon specific hobbing methods and parameters.
F-M
Modul cutters
Modul cutters in HSS-E or Carbide.Quality class B or A, Topping or Non topping.
Modul range 0.1 - 3.5.
Standards per ISO 53, DIN 867 U2-N2, 3972 I-II-III, 58400 U1-N1, NF E22-011, ANSI, AGMA, BS 978 P1-F1, BS 4582 P1-F1 as well as for Cylcoidal gears or special profiles.
Some Involute profiles per DIN867, 20° PA available from stock.
F-SG
Cutters for worms / threads
Cutters for worms / threads in PM or Carbide. Available with 1 or 2 rows of teeth.Quality class A or AA, Topping or non topping.
Modul range 0.2 - 3.5.
For involutes or special profiles per customer workpiece drawings.
Standards per DIN 11, 13, 867, ISO, UNF or UNC.
F-SL
Cutters for key profiles
Cutters for key profiles in PM or Carbide.Quality class A or AA.
Profiles per customer workpiece drawings.
F-ZS
Cutters for racks
Rack cutters in PM or Carbide.Quality class A or AA, Topping or Non topping.
Available as single, set or group of cutters.
Modul range 0.15 - 3. With straight or spiral flutes (gashes).
To design these cutters we need the rack data as well as the desired number of rows of teeth on the cutter.
F-KB
Cutters for notches
Cutters for notches in HSS-E or Carbide.Quality class A.
For ISO pointed tip and rounded notches per DIN 50115.
F-SP
Cutters for special tooth forms
Cutters in PM or Carbide.Quality class A or AA, Topping or non topping.
Customer specific requirements must be furnished.
Shaper cutters in PM or Carbide. Quality class B and A. Available as disc type shaper cutter, bell type shaper cutter or shank type shaper cutter. For external and internal gears. Modul range 0.2 - 3. We need to know the standard required or a drawing of the workpiece as well as details of the required shank complete with stroke length.
S-EV
Shaper cutters for involute gears
Shaper cutter for involute gears in PM or Carbide.Quality class A, AA, Topping or non topping.
Modul range 0.2 - 2.5.
Standards ISO 53, DIN 867 U2-N2, 3972 I-II-III, 58400 U1-N1, NF E22-011, ANSI, AGMA, BS 978 P1, F1, BS 4582 P1, F1 and NF S 80-565.
Limited stock available.
S-CG
Shaper cutters for crown gears
Shaper cutters for involute crown gears in PM or Carbide.Quality class A, AA, Topping or non topping.
S-ZW
Shaper cutters for involute splines
Shaper cutters in PM or Carbide for involute splines.Quality class A, AA, Topping or non topping, with or without tip champfer.
Modul range 0.3 - 4.
Per DIN 5480, DIN 5482, ANSI B92.1, NF E22-141, NF E22-144, BS 3550.
S-KBW
Shaper cutters for serrations
Shaper cutters in PM or Carbide for serrations.Quality class A, AA, Non topping. Modul range 0.2 - 3.5.
Per DIN 5481A, SAE, BS 2059, NF E22-151.
A shaper cutter is required for each different number of teeth to be cut.
S-KW
Shaper cutters for parallel side splines
Shaper cutters in PM or Carbide for parallel side splines.Quality class A, Topping or non topping, With or without tip champfer.
Max pitch 20mm.
Per DIN 5463, 5470, E22-131, SAE.
With or without Hocker. A different shaper cutter is required for each type of parallel side spline.
S-ZR
Shaper cutters for timing belt pulleys
Shaper cutters in PM or Carbide for parallel side splines.Quality class A, Topping or non topping, With or without tip champfer.
Max pitch 20mm.
Per DIN 5463, 5470, E22-131, SAE.
With or without Hocker. A different shaper cutter is required for each type of parallel side spline.
S-SP
Shaper cutters for special tooth forms
Shaper cutters for special tooth forms in PM or Carbide.Quality class A or AA, Topping or non topping.
Modul range 0.2 - 3.
Per customer specific workpiece drawings.
L-Z
Master Gears
For standard profiles per DIN 867 and DIN 58400 we have master gears with dimensions per DIN 58420, DIN 3970 and SCHNY L-Z ECO in stock.Special designs for master gears are available per your specifications.
Master gears can be designed and optimized for the following applications: Working test for 1 and 2 flank measurements, Center distance measurements, Master gear
L-S
Master Worms
Special designs per your workpiece data.Master worms can be designed and optimized for the following applications: Rolling test for 1 and 2 flank measurments, Center distance measurements, Master worms
R-GW
Roll dies
Roll dies for chip free forming in Cr-steel or Carbide, 1 or more start, 1 or more row, Pitch 0.2 - 1mm, Standards: DIN 13 or similiar for special profiles.
R-ZH
Mandrels / bushings
Profiling tools for cold forming in HSS-E or Carbide. Pitch range 0.3 - 5mm with up to 45° helix angle. Available with special coating with low co-efficient of friction.
R-SP
Special roll dies
High precision profiling tools of various types: CBN or diamond coated generating grinding wheels (1 or more start) for generation grinding of hardened gears.Suggestion: We recommend our engineering services for proper design of your gearing applications.
E-M
Multiple gear electrodes
2 to 3 step electrodes with roughing and finishing sections.
E-V
Roughing electrodes
1 step electrode for roughing.
E-S
Finishing electrodes
1 step electrode for finishing.
Find the right tool
articles found
| # | Qty | Art.Nr. | Profile | Standard | Dimensions | Mat. | Coating | Strts/Z | Hand | Qual. | Version | Keyw. | Driv.sl. | Taper lead in | Shank type |
|---|
It seems that we don't have the Gear cutting tool that you are looking for in stock, but we can build it for you.
It seems that we don't have the Gear cutting tool that you are looking for in stock, but we can build it for you.